Friday, July 10, 2015

Using remote PowerShell to log into Office 365 and review archive mailboxes

I’m not much of an Office 365 expert but have recently had the opportunity to work with a client to migrate their on prem Exchange 2010 archive over to O365.  The process of deploying ADFS and DirSync was fairly painless but there seemed to be some confusion when I called into Microsoft Office 365 support where the support engineer did not understand why the migrated archived mailbox did not show up in the EAC (Exchange Admin Center).  To make a long story short, it was not until I worked with the third engineer when I was finally told it’s not to supposed to show up if the user’s mailbox is hosted on prem while the archive is hosted on Office 365.  The purpose of this post is for me to list the steps for reviewing the migrated archive mailboxes in case I need it again in the future.

The first step is to connect to Office 365 by launching PowerShell and execute the following:

$LiveCred = Get-Credential

$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://ps.outlook.com/powershell/ -Credential $LiveCred -Authentication Basic -AllowRedirection

Set-ExecutionPolicy Unrestricted -Force

Import-PSSession $Session

clip_image002

Log in with your administrative O365 credentials:

image

You should see the following output once successfully authenticated:

clip_image002[4]

Proceed an execute the following cmdlet to list a specific user’s archive mailbox:

Get-MailUser -Identity <userName@domain.com> |fl *archive*

image

Do not attempt to use the cmdlet:

Get-Mailbox -archive

… to list a user a user’s archive because it will not work when the user has an on prem mailbox with an O365 hosted archive:

image

To verify that the archive mailbox located on O365 is belongs to the on prem mailbox, compare the ArchiveGuid listed for the archive on O365 and the ArchiveGuid for the mailbox on the on prem mailbox by executing the following cmdlet:

Get-Mailbox -Identity <userName@domain.com> |fl *archive*

image

If you ever wanted to check whether a user’s archive is located on prem or Office 365, you can launch the Test E-mail AutoConfiguration option for Outlook, run the test, navigate to the XML tab and look for the <Type>Archive</T> tag that specifies the SmtpAddress as Office 365 rather than the internal on prem Exchange server:

imageimage

To list all the archive mailboxes that are hosted on Office 365, execute the following cmdlet:

Get-MailUser | Where-Object {$_.ArchiveStatus -match "Active"} | fl DisplayName,*archive*

image

Wednesday, July 8, 2015

Searching through OWA (Outlook Web App) on Exchange 2013 returns only 1 month of results

Problem

You’ve received complaints that users searching their inbox with OWA or Outlook in Online mode only returns 1 month of results.  Using the following Get-MailboxDatabaseCopyStatus cmdlet:

Get-MailboxDatabaseCopyStatus –server <mailboxServerName> | FL *index*,*ma*ser*,databasename

image

… shows that the ContentIndexState is listed as Healthy for the mailbox databases.

You proceed to stop the following services:

  • Microsoft Exchange Search Host Controller
  • Microsoft Exchange Search

Then rename or delete the content index folder named with the GUID of the database and restart the services again forcing Exchange to rebuild the content indexes.  However, you notice that searching still continues to return the same incomplete results.

Solution

This issue took me a bit of time to troubleshoot because attempting to search for anything related to searching points to the solution above but the environment I was working on did not have the ContentIndexState listed as FailedAndSuspended.  I tried searching for the ContentIndexRetryQueueSize variable because the value was high and all of the results pointed me to install CU7 when I already had CU8 installed.

What I found that eventually led me to the underlying issue was the following warning that got repeatedly written to the application log:

Log Name: Application

Source: MSExchangeFastSearch

Event ID: 1009

Level: Warning

image

The indexing of mailbox database Admin encountered an unexpected exception. Error details: Microsoft.Exchange.Search.Core.Abstraction.OperationFailedException: The component operation has failed. ---> Microsoft.Exchange.Search.Core.Abstraction.ComponentFailedPermanentException: Failed to read notifications, MDB: 8f76b2d9-77dd-44e6-a8ef-73d2a2539ae1. ---> Microsoft.Mapi.MapiExceptionMdbOffline: MapiExceptionMdbOffline: Unable to read events. (hr=0x80004005, ec=1142)

Diagnostic context:

Lid: 49384

Lid: 51176 StoreEc: 0x476

Lid: 40680 StoreEc: 0x476

Lid: 43980

Lid: 16354 StoreEc: 0x476

Lid: 38985 StoreEc: 0x476

Lid: 20098

Lid: 20585 StoreEc: 0x476

at Microsoft.Mapi.MapiExceptionHelper.InternalThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, Int32 ec, DiagnosticContext diagCtx, Exception innerException)

at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, IExInterface iUnknown, Exception innerException)

at Microsoft.Mapi.MapiEventManager.ReadEvents(Int64 startCounter, Int32 eventCountWanted, Int32 eventCountToCheck, Restriction filter, ReadEventsFlags flags, Boolean includeSid, Int64& endCounter)

at Microsoft.Exchange.Search.Mdb.NotificationsEventSource.<>c__DisplayClass3.<ReadEvents>b__1()

at Microsoft.Exchange.Search.Mdb.MapiUtil.<>c__DisplayClass1`1.<TranslateMapiExceptionsWithReturnValue>b__0()

at Microsoft.Exchange.Search.Mdb.MapiUtil.TranslateMapiExceptions(IDiagnosticsSession tracer, LocalizedString errorString, Action mapiCall)

--- End of inner exception stack trace ---

at Microsoft.Exchange.Search.Mdb.MapiUtil.TranslateMapiExceptions(IDiagnosticsSession tracer, LocalizedString errorString, Action mapiCall)

at Microsoft.Exchange.Search.Mdb.MapiUtil.TranslateMapiExceptionsWithReturnValue[TReturnValue](IDiagnosticsSession tracer, LocalizedString errorString, Func`1 mapiCall)

at Microsoft.Exchange.Search.Mdb.NotificationsEventSource.ReadEvents(Int64 startCounter, Int32 eventCountWanted, ReadEventsFlags flags, Int64& endCounter)

at Microsoft.Exchange.Search.Mdb.NotificationsEventSource.ReadFirstEventCounter()

at Microsoft.Exchange.Search.Engine.NotificationsEventSourceInfo..ctor(IWatermarkStorage watermarkStorage, INotificationsEventSource eventSource, IDiagnosticsSession diagnosticsSession, MdbInfo mdbInfo)

at Microsoft.Exchange.Search.Engine.SearchFeedingController.DetermineFeederStateAndStartFeeders()

at Microsoft.Exchange.Search.Engine.SearchFeedingController.InternalExecutionStart()

at Microsoft.Exchange.Search.Core.Common.Executable.InternalExecutionStart(Object state)

--- End of inner exception stack trace ---

at Microsoft.Exchange.Search.Core.Common.Executable.EndExecute(IAsyncResult asyncResult)

at Microsoft.Exchange.Search.Engine.SearchRootController.ExecuteComplete(IAsyncResult asyncResult)

From here, I went ahead to compare the content index catalog sizes between the 3 mailbox databases in the environment and quickly noticed that the problematic mailbox database had a catalog that was 1.5GB while the others were 9.5GBs or more.

My hunch was that the Veeam backups which take place at 11:00p.m. every evening was conflicting with the index building engine so I proceeded to stop the backups for the evening, forced Exchange to rebuild the index catalog over the evening.  After leaving the environment for a day, I went back to test searching on both and Outlook client in Online mode and through OWA and was able to retrieve results older than 1 month.